MasterGage/Professional Benefits



ACCURACY - Align your machinery precisely to any angle to within a 1/4 degree and to within .001 inches
SPEED - Machine alignment is fast and easy
ECONOMICAL - Use the Pro on every piece of machinery in your shop. No need to buy a dozen tools when the MasterGage/Professional does it all.
IMPROVE QUALITY - With your machine aligned, calibrated and tuned your projects will fit together gap free and surface cuts will be jointer smooth.
MINIMIZE SCRAP - No more rejected parts due to ragged and inaccurate cuts.

The MasterGage System can align calibrate and troubleshoot the following equipment.

  1. Table Saw 10. Band Saw
  2. Add-on Sliding Table Saw 11. Jointer
  3. Radial Arm Saw 12. Planer
  4. Chop Saw 13. Stationary Disk Sander
  5. Sliding Compound Miter Saw 14. Stationary Drum Sander
  6. Router 15. Stationary Belt Sander
  7. Router Table 16. Horizontal Mortiser
  8. Shaper 17. Doweller
  9. Drill Press 18. Grinder

The MasterGage System can be used as:
  1. Height Gage 5. Set up Tool
  2. Square 6. Bevel Gage
  3. Calibration Gage 7. Inch/mm Conversion Gage
  4. Miter Gage 8. Depth Gage


MasterGage/Classic Benefits


VERSATILE - Use the Classic on any machine, no need to rely on the inaccurate machine scales. Many Accessories may be added to increase the unit's capabilities.
EASY TO USE - Very "user friendly" with a comprehensive manual to guide you.
MONEY SAVER - The Classic will pay for itself very quickly as you reduce your scrap and the machinery runs with increased efficiency.
CONTROL - Now you can correct those invisible and dangerous misalignments in your machinery to machine shop tolerances,

The MasterGage System can align calibrate and troubleshoot the following equipment.

  1. Table Saw 10. Band Saw
  2. Add-on Sliding Table Saw 11. Jointer
  3. Radial Arm Saw 12. Planer
  4. Chop Saw 13. Stationary Disk Sander
  5. Sliding Compound Miter Saw 14. Stationary Drum Sander
  6. Router 15. Stationary Belt Sander
  7. Router Table 16. Horizontal Mortiser
  8. Shaper 17. Doweller
  9. Drill Press 18. Grinder

The MasterGage System can be used as:
  1. Height Gage 5. Set up Tool
  2. Square 6. Bevel Gage
  3. Calibration Gage 7. Inch/mm Conversion Gage
  4. Miter Gage 8. Depth Gage


MasterPlate Benefits

Tablesaws, radial arm saws, miter saws and compound saws can be aligned easily. No more relying on a questionable saw blade for alignment accuracy.
SuperBar Benefits


Align, set up, calibrate and troubleshoot a tablesaw to perfection.

  
Universal Angle Guide Benefits
  


• No math or calculations required
• Eliminate gaps and misalignment in all your angle cuts
• Read any angle with your sliding "T" bevel, fast and accurately
• Designed for both right hand and left hand "T" bevel readings
• Set any angle, including bevel/miter angles, to ½° accuracy
• Set an angle and get the complementary angle automatically
• Measure both inside AND outside corners
• Ideal for setting/measuring angle cuts for crown molding, etc
• Transfer angles from your work to any machine
• Set measure required angles on tablesaws, bandsaws, etc
• Handy Angle Chart gives required angles for multiple sided boxes
• Set measure saw blade/router bit heights to 1/32 inches or 1 millimeter accuracy with the Height   Gauges
• OPTIONAL Height Gauge Block makes height measurements a snap
• Portability - at home - to the shop - to the building site
• Great for chair makers, furniture makers, cabinetmakers, finish carpenters or anyone who works   with angle making requirements

  
Large Caliper Step Gauge Benefits
  

• Caliper tips register against a precise, flat surface for positive caliper readings
• Easy reading, with direct reading of calipers to a specific, marked dimensional surface.
• Almost any style of calipers can be used to measure.
• The OUTSIDE and INSIDE measurements begin with the same dimensions that the Small Caliper Step Gauge ends. OUTSIDE = 2 1/2", INSIDE = 1 1/2".
• The Caliper Step Gauge has two handy wall mounting holes.
• It can be used as a free standing unit, by simply making a base with a dado slot to house it in an upright position.
• The Large Caliper Step Gauge can also be used as a hand held measurement tool.
• The Large Caliper Step Gauge is designed to be wall mounted directly below the Small Caliper Step Gauge, This gives you one direct access to a full range of caliper measurements.

  
Small Caliper Step Gauge Benefits
  

• Caliper tips register against a precise, flat surface for positive caliper readings
• Easy reading, with direct reading of calipers to a specific, marked dimensional surface.
• Almost any style of calipers can be used to measure.
• The OUTSIDE and INSIDE measurements end with the same dimensions that the Large Caliper Step Gauge begins.
• The Caliper Step Gauge has two handy wall mounting holes.
• It can be used as a free standing unit, by simply making a base with a dado slot to house it in an upright position.
• The Small Caliper Step Gauge can also be used as a hand held measurement tool.
• The Small Caliper Step Gauge is designed to be wall mounted directly above the Large Caliper Step Gauge, This gives you one direct access to a full range of caliper measurements.

  
Planer Blade Setting Jig-Black Series Benefits
  

•Get precise blade settings to within 0.001" (1/1000").
•"User Friendly" Planer Jig makes planer blade adjustment or blade replacement a snap.
•Finally get glass smooth finishes from your planer.

  
1-2-3 MicroGage
  
This section is under construction
 
Copyright©1996-2010 MasterGage Corp. All rights reserved
Contact Webmaster -MasterGage Toll Free Number 1-888-893-8300